ARCHITECTURAL SERIES
Aluminum Full-View Doors and Steel Insulated Full-View Doors
Email Print BrochureCLOPAY’S FULL-VIEW SERIES DOORS ARE IDEAL FOR COMMERCIAL BUILDINGS REQUIRING VISIBILITY
Clopay’s full-view series doors are ideal for commercial buildings requiring visibility, access to natural lighting and modern look. They’re the perfect choice for everything from restaurants and fire stations to service stations and car dealerships.
These overhead doors are available with aluminum or steel frame construction, providing options that ensure maximum durability and reliability. Customize your door with a wide variety of window, color, design and performance options.
ALUMINUM FULL-VIEW
Model | Thickness | Spacing | Max Width✭ | Max Height✭ |
904 | 2-1/8″ | Equal width & spacing | 24’2″ | 20’0″ |
903 | 2-1/8″ | Equal panel spacing | 24’2″ | 20’0″ |
902 | 2-1/8″ | 44″ on center, end panels vary | 24’2″ | 20’0″ |
✭Maximum Width and Height values listed are Standard sizing.
INSULATED STEEL FULL-VIEW
* R-values calculated per DASMA TDS-163 on a solid door
** R-values calculated per DASMA TDS-163 using weighted average with 3/4″ insulated glass.
✭Maximum Width and Height values listed are Standard sizing.
Page Updated August 7, 2020
CHOOSE YOUR MATERIAL
Aluminum Full-View Doors
Steel Insulated Modern Doors
ALUMINUM FULL-VIEW DOORS
WINDOW SPACING COMPARISON BY SIZE
GLASS/PANEL OPTIONS:
GLAZING MATERIAL OPTIONS:
CLEAR GLASS
GRAY TINTED GLASS
BRONZE TINTED GLASS
MIRRORED GLASS*
OBSCURE GLASS
WHITE LAMINATE GLASS*
BLACK LAMINATE GLASS*
FROSTED GLASS OR ACRYLIC
CLEAR ACRYLIC
GRAY ACRYLIC
WHITE ACRYLIC
CLEAR POLYCARBONATE
BRONZE POLYCARBONATE
ALUMINUM PANEL COLOR MATCH
*Mirrored and laminate not available in 1/2″
Glass options above only available on full-view sections. Glass thickness available in 1/8″, 1/4″ and 1/2″. Tri-wall polycarbonate thickness available in 1/2″ (Model 902/903 Only) and 5/8″ (Model 904 Only). Low-E available on insulated glass.
COLOR OPTIONS:
CLEAR ALUMINUM (ANODIZED)
STANDARD WHITE
BRONZE (PAINTED)
CHOCOLATE (PAINTED)
BRONZE ANODIZED*
BLACK (ANODIZED)*
DARK BRONZE ANODIZED*
*Additional cost and lead time may apply. The use of “Bronze (Painted)” is recommended due to slight color variation that may occur during the anodizing process.
Custom powder coat, Color Blast®, and anodized finishes available.
Premium finishing options include:
- RAL color powder coat
- 187 different powder coat offerings
- Custom Colors with Color Blast ® Garage Door Paint System
- Bronze, dark bronze, black or custom color anodized finishing
PERFORMANCE OPTIONS AVAILABLE:
Double-end hinge
3” Track
High performance hardware features 10 gauge end hinges, heavy-duty top bracket and 3″ sealed roller with 5/8″ stem.
25,000, 50,000 or 100,000 cycle springs available.
Exhaust port can be cut into any type of solid sectional door. Available in select sizes.
WindCode® reinforcement available up to W2 design pressure (DP) 14 PSF, depending on door configuration. Doors tested 50% greater than DP.
Upgrade your standard door with industrial-grade components.
SPECIALTY OPTIONS AVAILABLE:
MULLIONS
Carry-away, roll-away or swing-up mullions are available on select sizes.
STEEL INSULATED FULL-VIEW DOORS
GLASS/WINDOW OPTIONS:
*Available on models 3728/3729 and 3208/3209 only.
Models 3728 and 3729 are available with 1/8″ clear tempered, 1/8″ frosted tempered, 3/4″ insulated tempered and 3/4″ frosted insulated tempered glass. Additional glazing options include: matte, pebble, bronze tinted and impact rated window.
COLOR OPTIONS:
STANDARD WHITE
GLACIER WHITE
ALMOND
DESERT TAN
SANDTONE
BRONZE
MOCHA BROWN
GRAY
CHARCOAL
CHOCOLATE
BLACK*
TRINAR® WHITE*
*Additional cost and lead time may apply.
Custom powder coat and Color Blast® finishes available.
Premium finishing options include:
- Custom Colors with Color Blast ® Garage Door Paint System
- Bronze, dark bronze, black or custom color anodized finishing
PERFORMANCE OPTIONS AVAILABLE:
Double-end hinge
3” Track
High performance hardware features 10 gauge end hinges, heavy-duty top bracket and 3″ sealed roller with 5/8″ stem.
25,000, 50,000 or 100,000 cycle springs available.
Exhaust port can be cut into any type of solid sectional door. Available in select sizes.
WindCode® reinforcement available up to W1 design pressure (DP) 14 PSF, depending on size. Doors tested 50% greater than DP.
Upgrade your standard door with industrial-grade components.
SPECIALTY OPTIONS AVAILABLE:
MULLIONS
Carry-away, roll-away or swing-up mullions are available on select sizes.
SAFE-T-STOP™ CHAIN HOIST
The Safe-T-Stop is a controlled descent sectional door hand hoist with an integral braking system allowing users to operate the door with confidence.
CHOOSE YOUR MATERIAL
Jump to Aluminum Full-View Doors
Jump to Steel Insulated Full-View Doors
ALUMINUM FULL-VIEW DOORS
MODEL 904 | |
---|---|
Exterior Skin Pattern: | Recessed aluminum panel |
Exterior Aluminum Gauge: | 6063-T5 Aluminum |
Colors: | Clear Aluminum (Anodized), Standard White, Bronze (Painted), Chocolate (Painted), Bronze (Anodized), Dark Bronze (Anodized) |
Warranty: | Limited 5-year finish / 1-year material and workmanship |
Made of 2-1/8” durable commercial grade aluminum, making it virtually maintenance-free and long-lasting.
Tongue-and-groove with integral joint seal for further reduction of air and water infiltration.
Smooth flat frame edge design for a more contemporary look.
Reinforcing fin included on doors wider than 14’. Doors 12’ and under do not use built-in reinforcing fin. Usage on widths 12’2” to 14’ depend upon glass weight. WINDCODE® doors may vary.
MODEL 903 | |
---|---|
Exterior Skin Pattern: | Recessed aluminum panel |
Exterior Aluminum Gauge: | 6063-T5 Aluminum |
Colors: | Clear Aluminum (Anodized), Standard White, Bronze (Painted), Chocolate (Painted), Bronze (Anodized), Dark Bronze (Anodized) |
Warranty: | Limited 5-year finish / 1-year material and workmanship |
Made of 2-1/8” durable commercial grade aluminum, making it virtually maintenance-free and long-lasting.
Tongue and groove section.
Slanted beveled frame edge design for a classic look.
Reinforcing fin included on all doors.
STEEL INSULATED FULL-VIEW DOORS
All of our Steel Insulated Door models come with the following:
Joint Design: | Tongue and groove section with continuous foam thermal break prevents cold or heat from passing through the section |
Paint System: | 3-stage paint process delivers maintenance free finish that resists rust perforation |
Warranty: | Limited 10-year paint/ 10-year delamination / 1 year material and workmanship / 1 year hardware |
MODEL 3728/3729
Panel Design: | (3728) 2” stucco embossed steel flush steel exterior (3729) 2” thick stucco embossed steel exterior with minor ribbed pattern |
Steel Gauge: | 27 (.016” min) exteriror; 28 (.015” min) |
Colors: | White, Glacier White, Chocolate, Mocha Brown, Black, gray, Trinar White, Almond, Sandtone, Desert Tan, Bronze |
MODEL 3708/3709
Panel Design: | (3708) 1-3/8” stucco embossed steel flush steel exterior (3709) 1-3/8” thick stucco embossed steel exterior with minor ribbed pattern |
Steel Gauge: | 27 (.016” min) exterior; 28 (.015” min) |
Colors: | Standard White, Glacier White, Chocolate, Mocha Brown, Black, Trinar White, Almond, Sandtone, Desert Tan, Bronze |
MODEL 3208/3209
Panel Design: | (3208) 2” stucco embossed steel flush steel exterior (3209) 2” thick stucco embossed steel exterior |
Steel Gauge: | (.016” min) exterior; 28 (.015” min) |
Colors: | Standard White, Chocolate, Black, Gray, Charcoal, Trinar White |
MODEL 3158/3159
Panel Design: | (3158) 1-3/8” stucco embossed steel flush exterior (3159) 1-3/8” thick stucco embossed steel exterior with minor ribbed pattern |
Steel Gauge: | 27 (.016” min) exterior: 28 (.015” min) |
Colors: | Standard White, Glacier White, Chocolate, Black, Gray, Trinar White, Almond, Sandtone, Desert Tan, Bronze. |
Extended 8 Year Hardware Warranty 904 Brochure Safe-T-Stop™ Chain Hoist Brochure 903 / 902 Brochure 3728 / 3729 Brochure 3708 / 3709 Brochure 3208 / 3209 Brochure 3158 / 3159 Brochure COMMERCIAL OVERVIEW
COMMERCIAL HARDWARE
Commercial doors are designed with hardware to meet demanding applications of commercial building usage. All commercial doors are provided with the following hardware as standard. For additional upgraded hardware see “Options” tab.
- 14 gauge hinges
- Commercial 10 ball steel rollers with options for nylon tire rollers
- 10,000 cycle torsion springs
- Steel step plate and lift handle for easy operation
- Inside slide lock for increase security
- 19 gauge steel hinge support plates
- 18-gauge single end stiles; 16-gauge double end stiles
- Galvanized aircraft cables with 7:1 safety factory
- 2” or 3” track in a variety of configurations to meet building design requirements
COMMERCIAL TRACK APPLICATIONS
In commercial settings, space utilization and space constraints are important factors in choosing the correct hardware configuration for your application. Clopay track offerings and options enable you to make the most efficient use of available space. Options include standard lift, low head room front or rear mount, follow the roof pitch, full vertical or combination of these options. Learn more
COMMERCIAL TORSION SPRINGS
Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for Industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles. . Click here for details